Glass Microfiber Cartridges

GMF Series for general filtration & high flow rates at 99.98% efficiency

Product Information

  • AMBF’s Glass Microfiber cartridges offer a wide array of retention ratings from .5 to 7 microns
  • All Glass Microfiber cartridges are produced in-house on the most modern equipment
  • Complete in-house testing guarantees a superior and consistent product
  • We offer all end cap configurations to fit your applications and housings
  • Cartridges have an excellent dirt holding capacity with low flow resistance
  • Acrylic bonded media for excellent chemical resistance
  • Each cartridge has a non-shedding final layer laminated on the media before pleating
  • Media grades available for FDA Title 21 for food and potable water contact
  • Hydrophobic media can be produced if required for your applications
  • Cartridges are constructed in a clean room environment
  • Cartridges may be ordered as final rinsed with 18 mega ohm water
Glass Microfiber Cartridges
Glass Microfiber Cartridges
Download Cut Sheet


Toxicity Purity
AMBF’s Cartridges are manufactured with no additives or other manufacturing agents. Cartridges are Free of Surfactants, Resins, Binders and Adhesives
Sterilization
Multiple Autoclaving for 30 Minutes at 250°F (121°C) under no End Load Conditions. In-line Steam Sterilization is not recommended. May be In-line Sanitized with Hot Water at 180°F (82°C) for 1 hour.


Product Specifications

Product Specifications
Retention Ratings .5, .8, 1.2, 2.0, 2.7, 4.0, 6.4 & 7.0 micron
Media Acrylic bonded glass microfiber
Support Media Polypropylene
End Caps Polypropylene
Center Core Polypropylene
Outer Support Cage Polypropylene
Maximum Operating Temperature 180°F
Nominal Diameter O.D. - 2.7"
I.D. - 1" center
Lengths 10, 20, 30, & 40 inch
Maximum Differential Pressure 45 psid


Building a Product Number

Glass Microfiber Micron Cartridge
Length
Core
Material
End Cap (Help?) Gasket/O-Ring 18 Mega Ohm Rinse
GMF 1.2 3 E 2 B R
GMF .5
.8
1.2
2.0
2.7
4.0
6.4
7.0
3 = 10
5 = 20
7 = 30
9 = 40
E = Polypropylene 2 = 222/Fin
4 = 222/Flat
5 = 226/Flat
6 = 226/Fin
9 = Flat Gasket
B = Buna
V = Viton®
T = Teflon®
S = Silicone
N = Neoprene
D = EPDM
R


Live Chat! Price Quote!