Proudly Made in America

Products

Glass Microfiber Cartridges

GMF Series for general filtration & high flow rates at 99.98% efficiency

AMBF’s Glass Microfiber cartridges offer a wide array of retention ratings from .5 to 7 microns. All Glass Microfiber cartridges are produced in-house on the most modern equipment. Complete in-house testing guarantees a superior and consistent product. We offer all end cap configurations to fit your applications and housings.

Cartridges have an excellent dirt holding capacity with low flow resistance
Acrylic bonded media for excellent chemical resistance
Each cartridge has a non-shedding final layer laminated on the media before pleating
Media grades available for FDA Title 21 for food and potable water contact
Hydrophobic media can be produced if required for your applications
Cartridges are constructed in a clean room environment
Cartridges may be ordered as final rinsed with 18 mega ohm water

Product Specifications


Retention Ratings	.5, .8, 1.2, 2.0, 2.7, 4.0, 6.4 & 7.0 micron
Media	Acrylic bonded glass microfiber
Support Media	Polypropylene
End Caps	Polypropylene
Center Core	Polypropylene
Outer Support Cage	Polypropylene
Maximum Operating Temperature	180°F
Nominal Diameter	O.D. – 2.7″ I.D. – 1″ center
Lengths	10, 20, 30, & 40 inch
Maximum Differential Pressure	45 psid
Toxicity	Manufactured with no additives or other manufacturing agents.
Purity	Cartridges are Free of Surfactants, Resins, Binders and Adhesives
Sterilization	Multiple Autoclaving for 30 Minutes at 250°F (121°C) under no End Load Conditions. In-line Steam Sterilization is not recommended. May be In-line Sanitized with Hot Water at 180°F (82°C) for 1 hour.

FDA compliance under Title 21 of the code of federal regulations for food contact applications

Applications

Resources

Product Identification

Glass Microfiber	Micron		Cartridge Length	Core Material	End Cap	Gasket/O-Ring	18 Mega Ohm Rinse
GMF	1.2		3	E	2	B	R
GMF	.5 .8 1.2 2.0	2.7 4.0 6.4 7.0	3 = 10 5 = 20 7 = 30 9 = 40	E = Polypropylene	2 = 222/Fin 4 = 222/Flat 5 = 226/Flat 6 = 226/Fin 9 = Flat Gasket	B = Buna V = Viton® T = Teflon® S = Silicone N = Neoprene D = EPDM	R

We're here to assist you

With over half a century of hands-on experience in all types of liquid filtration systems, our Filtration Specialists are ready to help you find the perfect product for your filtration needs.